
WATER PIPE INSTALLATIONS
We use trenchless technology where possible to reduce the disruption and damage to your property whilst installing a new water pipe.
Impact moling new plastic water pipes into position is our standard method of installation. See picture above.
We can install your new water supply by impact moling between excavations to save disturbing most surfaces at your property. Usually there is very little evidence of the pipe being installed underground!
If the pipe cant be impact moled into position then we may have to use the trenching out technique. Our operatives are very careful when excavating ground to make sure no damage is caused to other underground assets and the surrounding surfaces and structures. We put all ground back like for like with any waste being removed from site and responsibly disposed of away from site. See pictures below.

LARGER INSTALLATIONS
For the larger commercial installations or projects with several hundred metres of pipe to install we can use our directional drilling technique to install up to 150 linear metres of pipe between two excavations.
This is massively beneficial financially for the longer distances because it saves on the cost of having to reinstate the ground and surfaces which would normally be excavated.
Let us assess your project and we will determine the most cost-effective method of installation.

GALLERY OF COMPLETED WORK
Here are some examples of sites we’ve worked on and installations that we have carried out.



